Ducted Fuji Electric

A thin duct type conditioner, which is suitable for installation in premises with low ceiling or confined space. It can be mounted horizontally or vertically. Thanks to the DC ventilator, a static pressure is achieved (0 to 90 Pa). It has the following characteristics:  -  V-PAM tech, whic..

Duct type air-conditioner that is compact in size for vertical or horizontal installation on low ceiling or tight spaces. It has entirely DC modules and thanks to that, it can maintain a static pressure from 0 - 90 Pa.  -  V-PAM tech, which increases its effectiveness and performance. ..

Duct Type conditioner, that is created for vertical or horizontal ceiling installation. Its small size allows for greater choice of places to install it. It comes with a big number of technologies, which improve the air conditioning process by reducing the energy consumption and by providing steady ..

Modular duct type air conditioner which has a small size to allow the installation at low ceilings or tight spaces between the standard and the suspended ceiling. Air ducts can be attached from bellow and behind, which let in fresh air from outside. It has a standard pressure of 30-150 Pa and flow r..

Duct Type air-conditioner with a modular design which allows for greater flexibility during its installation. The air ducts can be connected from bellow or from behind, in order to assist in the transportation of the fresh and clean air from outside. It hase a standard pressure of 30 - 150 Pa and fl..

Duct type air-conditioner by Fuji electric, that operates with a three-phase voltage for additional stability. Air ducts can be connected from below and behind. It uses i-PAM & V-PAM, in order to achieve the highest possible power outputs and optimal consumption of energy. The pressure has a wid..

Duct Type air-conditioner with a modular design which allows for greater flexibility during its installation. The air ducts can be connected from bellow or from behind, in order to assist in the transportation of the fresh and clean air from outside. It hase a standard pressure of 30 - 150 Pa and fl..

Duct-type air-conditioner with a modular design that can have air duct attaching from below and behind. This and the size of the indoor body allow it to be installed between suspended and standard ceilings with little room in between. Clean and fresh air can be transported from outside using the air..

An air-conditioner by Fuji Electry, duct type RDG45LMLA-ROG45LETL. It is compact and modular, that allows to be installed in tight places. the high power output is achieved via i-PAM technology, and its economy - via V-PAM, which controls how the consumption of energy is done. It has a standard pres..

An air-conditioner (duct type) with a very high pressure of 100 - 250 Pa and flow rate of 3350 m3/h. The indoor body is lightweight due to the very light materials that were used for it, thus allowing to be installed on places, where previously it couldn't be done. The noise is reduced thanks to the..